Showing posts with label Indicators. Show all posts
Showing posts with label Indicators. Show all posts

Follow Line Indicator


FollowLine is a powerful VertexFX indicator based on the Bollinger Bands (BB) indicator.

The Bollinger Bands indicator is a powerful indicator to identify trading ranges. However it cannot identify how far the trend will continue, or when the trend will reverse. The FollowLine indicator employs a combination of Bollinger Bands, Moving Average and Average True Range to identify start and reversal of trend with minimal lag.


To use FollowLine Indicator download it from here, then place it at VertexFX VTL directory: 
C:\Users\"Username"\AppData\Roaming\VertexFX Client Terminals\"Company name"\VTL10\Local VTL Scripts
Then right-click on the tree and select refresh or restart your client station and you will find under VTL local scripts in your client terminal. 

You can check this video that talks about the FollowLine  Indicator:




CCI Filter Indicator


CCI Filter Indicator is a VertexFX indicator that provides important information on the trend. It is cyclical in nature and follows price closely.
CCI Filter VTL indicator consists of the normal Commodity Channel Index – CCI indicator and the Moving Average of the CCI itself.
When CCI has bottomed out below zero level and is rising gradually, it implies that the market is rising and is bullish.
On the contrary, when the CCI has peaked and is falling gradually, it implies that the market is falling and is bearish.

To use CCI Filter Indicator download it from here, then place it at VertexFX VTL directory: 
C:\Users\"Username"\AppData\Roaming\VertexFX Client Terminals\"Company name"\VTL10\Local VTL Scripts
Then right-click on the tree and select refresh or restart your client station and you will find under VTL local scripts in your client terminal. 

You can check this video that talks about the CCI Filter Indicator:


xPoints Indicator


xPoints indicator is a VertexFX client-side indicator that predicts the possible reversal points. The concept behind this indicator is based on the fact that sometime before the turn of the price there are so-called bars X-points, in which rate=(High-Low)/MathAbs(Close-Open) more than 1. If rate more than 1 and low touches the lower border of the channel (price increasing is possible) or High touches the upper border of the channel (price decreasing is possible), then the indicator gives a signal to buy or sell.
To filter false signals, the indicator analyzes the bar following the X-point to detect at least small price movement in the predicted direction, and it detects the positions of middle points of bars as related to the mid-channel and to each other. The appearance of the red arrow indicator gives a signal to sell to the level of profit at the opposite border of the trading channel, and the appearance of the blue arrow signals the opening of the transaction for the purchase.
Trade is conducted only in the direction of the trend that is visually determined by the slope of the channel. The testing revealed another interesting feature of the ixndent parameter - it can be used to accurately calculate the opening moment. For example, open short positions when the price is above the arrow and vice versa, which provides an approximation of the opening to the point of a local extremum.
Description of the main Indicator input parameters: per (default = 3) - parameter, which is responsible for the period of construction of the shopping channel. This value must be adjusted empirically for each currency pair separately; xrate (default = 1.5) - minimum ratio. This parameter is responsible for the anti-aliasing, and the higher it is the more accurate the signals are fed to the opening position; xsize (default = 5) - the minimum height of the bar (High-Low); xslope (default = 0) - minimal increment of the next bar. Indicator input parameters: per=3; - channel building period xrate=1.5; - minimal rate xsize=5.0; - minimal bar height (High-Low) extern double xminupdn=10.0; - minimal channel width xhour1=9; - minimal hour, from which signals are allowed (inclusively) xhour2=19;- maximal hour, up to which channels are allowed (inclusively) xindent=15; - signal indent from the chart (it can be used for StopLoss, too)
To use xPoints Indicator Indicator download it from here, then place it at VertexFX VTL directory: 

C:\Users\"Username"\AppData\Roaming\VertexFX Client Terminals\"Company name"\VTL10\Local VTL Scripts

Then right click on the tree and select refresh or restart your client station and you will find under VTL local scripts in your client terminal. 

You can check this video that talks about xPoints Indicator:


PTL Perfect Trend Lines

    

 


Perfect Trend Lines (PTL) is a short-term trend trading VTL indicator. 

The lines showing the trend in this indicator are not straight lines like normal trend lines. A magenta diamond shape appears when a sell signal is generated. Cyan diamond shape appears for a buy signal. The magenta line can be used as a stop loss. 

The cyan line provides a tighter stop loss level. Strong downtrend bars are marked by a magenta dot at the bar high and strong uptrend bars are marked by a cyan dot at the bottom of the bar.

To use sRSI Indicator download it from HERE, then place it at VertexFX VTL directory:

C:\ProgramData\VertexFX Client Terminals\"Company name"\VTL10\Local VTL Scripts

Then right-click on the tree and select refresh or restart your client station and you will find under VTL local scripts in your client terminal.

You can check this video that talks about sRSI Indicator:


Brain Trend Signal Alerts Indicator

Brain Trend Signal Alerts Indicator

Brain Trend Signal Alerts is a VTL indicator that plots buy and sell signals. This indicator follows the short-term trend and it is a great intraday trading tool. This indicator identifies the trend changes using candle high lows and Average True Range.
                  
The red arrow appears when a downtrend is identified and a green arrow appears when the trend changes upward.

For best results, Brain Trend Alerts VTL can be used together with a long term moving average like the 200-period simple moving average. Buy signals are valid when the signal is generated above the moving average and sell signals are valid when they form below the moving average.

To use Brain Trend Signal Alerts Indicator download it from HERE, then place it at VertexFX VTL directory: 

C:\ProgramData\VertexFX Client Terminals\"Company name"\VTL10\Local VTL Scripts


Then right-click on the tree and select refresh or restart your client station and you will find under VTL local scripts in your client terminal.


You can check this video that talks about Brain Trend Signal Alerts Indicator:





Percentage Channel Indicator


Percentage Channel (PCC) is a VTL indicator that uses a certain percentage value of the price to draw the channel. As price moves upward or downward, the PCC shows trading opportunities. It is a trend following indicator, and the signals make good profits on long-lasting trends.

Traders can open a buy position when price establishes above the upper channel line. A short position is opened when price trade below the lower channel.

To use Percentage Channel Indicator download it from HERE, then place it at VertexFX VTL directory: C:\ProgramData\VertexFX Client Terminals\"Company name"\VTL10\Local VTL Scripts

Then right-click on the tree and select refresh or restart your client station and you will find under VTL local scripts in your client terminal.

You can check this video that talks about Percentage Channel Indicator:


sRSI Indicator



Sell Relative Strength Index (sRSI) is a VertexFX indicator that is based on enhanced implementation of the Relative Strength Index (RSI) indicator.
                      
The RSI indicator is useful in identifying the trend of the strength as well as the end of the trend. However, one of the drawbacks of the RSI is that it introduces lag.
                                        
Another drawback of RSI is that since all price changes are given equal weight the more recent price changes are not reflected quickly in the calculations.

To use sRSI Indicator download it from HERE, then place it at VertexFX VTL directory: 

C:\ProgramData\VertexFX Client Terminals\"Company name"\VTL10\Local VTL Scripts

Then right-click on the tree and select refresh or restart your client station and you will find under VTL local scripts in your client terminal.

You can check this video that talks about sRSI Indicator:





PTL Indicator


Perfect Trend Lines (PTL) is a short-term trend trading VTL indicator. The lines showing the trend in this indicator are not straight lines like normal trend lines. 

A magenta diamond shape appears when a sell signal is generated. 

Cyan diamond shape appears for a buy signal. The magenta line can be used as a stop loss. The cyan line provides a tighter stop loss level. Strong downtrend bar


To use PTL Indicator download it from HERE, then place it at VertexFX VTL directory:

C:\ProgramData\VertexFX Client Terminals\"Company name"\VTL10\Local VTL Scripts

Then right-click on the tree and select refresh or restart your client station and you will find under VTL local scripts in your client terminal.

You can check this video that talks about PTL Indicator:


Volatility Ratio



Volatility Ratio is a VertexFX indicator that is based on volatility and trend reversal. Volatility is a measure of fast market movements. When volatility increases the markets are moving fast and making big ranges. However, we cannot predict the direction of the market based on the volatility. The Volatility Ratio (VR) determines the direction and the end of the trend thus providing a valuable tool to traders.

To use Volatility Ratio Indicator download it from HERE, then place it at VertexFX VTL directory:
C:\ProgramData\VertexFX Client Terminals\"Company name"\VTL10\Local VTL Scripts

Then right-click on the tree and select refresh or restart your client station and you will find under VTL local scripts in your client terminal.

You can check this video that talks about Volatility Ratio Indicator:


STARC Bands Indicator


STARC Bands is a VertexFX VTL indicator that is used in trend trading where a range breakout is considered. STARC bands are three bands forming a channel around a simple moving average. STARC indicator is similar to Bollinger Bands but does not use standard deviations in its calculations. It is calculated by means of Average True Range (ATR) providing more detailed information on market volatility.

STARC bands are used in two modes. First one is as a trend following indicator. For this enter 1.33 for parameter KATR. Now when price breaks out of the bands, there is a high probability that price move will continue in that direction. Open positions in the breakout direction.
To use STARC bands as an oversold overbought indicator, make parameter KATR 3. Now when the price reaches the bands, chances are that it is a short-term price extreme. Countertrend trades can be opened here.
Parameters:
1. MA_Period – Moving Average Period
2. ATR_Period – Average True Range Period
3. KATR – ATR multiplier
4. Shift – Number of bars to shift forward

To use STARC Bands Indicator download it from HERE, then place it at VertexFX VTL directory:
C:\ProgramData\VertexFX Client Terminals\"Company name"\VTL10\Local VTL Scripts

Then right-click on the tree and select refresh or restart your client station and you will find under VTL local scripts in your client terminal.



You can check this video that talks about STARC Bands Indicator: